🆕 Newly Added Calculators:

🔄 Katha to Square Feet Converter

Muhammad Yasir Yasin
By Muhammad Yasir Yasin · Updated 12 Nov 2026 Founder · 20 Year+ Telecom + IT Expert
Muhammad Yasir Yasin

Muhammad Yasir Yasin

Founder, metacalculator.org

Muhammad Yasir Yasin is a Telecom + IT expert from Pakistan with 20+ years of proven experience — the career documented on his LinkedIn. He has been in pure IT since 1998, and works as a crypto consultant & trader since 2016. He is the founder of metacalculator.org, seotools.metacalculator.org (SEO Tools) and metatrendonline.com (Digital Products Market Place): free tools built to give clear, checked answers, with no sign-ups and no paywalls.

Every calculator here is built from the published formula, tested by hand, and explained in plain words.

Katha To Square Feet Converter

Result

Katha is a traditional land unit used across South Asia for plots and farmland. This converter turns katha into square feet so the size is easy to compare, price and document.

You also get the area in square meters, which helps when deeds or listings mix traditional and metric units.

Katha to square feet — with the one warning this unit always needs

The katha is a land unit of eastern South Asia: West Bengal, Bihar, Assam and Jharkhand in India, much of Bangladesh, and the Terai of Nepal all measure plots in katha. If you are reading a deed, a broker's note or a family record from any of those places, the katha figure has to become square feet before it can be priced, built on or compared.

So the warning first, because everything else depends on it: the katha is not one fixed size. Unlike the marla or the acre, its value changes from region to region — by a factor of five between the smallest and largest in common use. This converter uses 1 katha = 1,361.25 square feet, the exact convention followed in Bihar, where a katha is one twentieth of a bigha of 27,225 sq ft. If your land is in West Bengal or Bangladesh, where a katha is usually 720 sq ft, or in Assam (about 2,880 sq ft) or Nepal (about 3,645 sq ft), the table further down this page gives your region's figures instead. Every worked example on this page uses the converter's 1,361.25 sq ft, and says so.

The katha and the bigha

The katha is a subdivision: 20 katha make one bigha. The bigha itself also varies by region, which is the root of the katha's wanderings — where the bigha is large, the katha is large. In Bihar the standard bigha is 27,225 sq ft, so the katha is 27,225 ÷ 20 = 1,361.25 sq ft. In West Bengal and Bangladesh the standard bigha is 14,400 sq ft, giving a katha of 720 sq ft. In Assam the bigha is commonly 57,600 sq ft, giving 2,880 sq ft per katha; in Nepal's Terai a bigha of about 72,900 sq ft gives about 3,645 sq ft per katha. Same word, same fraction of the local bigha — four different areas of land.

Within the converter's convention, a katha of 1,361.25 sq ft sits at a familiar scale: it is exactly 5 marla of the Punjab system (5 × 272.25 = 1,361.25 sq ft), exactly 151.25 square yards, and about 126.46 square metres.

The formula

Square feet = Katha × 1,361.25 (this converter's Bihar-based convention)

And in square metres, square feet × 0.092903. For another region, replace 1,361.25 with that region's katha: 720 for West Bengal and Bangladesh, about 2,880 for Assam, about 3,645 for Nepal. The arithmetic never changes — only the local factor does, which is why confirming the factor is the whole skill of using this unit.

Worked examples (all at the converter's 1 katha = 1,361.25 sq ft)

Example 1 — the converter's own default. The calculator opens with 1 katha: 1 × 1,361.25 = 1,361.25 square feet, with the companion row showing 126.46 square metres.

Example 2 — a 5 katha house plot in Bihar. Five × 1,361.25 = 6,806.25 square feet (632.32 sq m) — a quarter of a bigha, and just over an eighth of an acre. The same "5 katha" in Kolkata or Dhaka, at 720 sq ft per katha, would be only 3,600 sq ft — barely more than half. This is why the region must travel with the number.

Example 3 — a full bigha. Twenty katha × 1,361.25 = 27,225 square feet — exactly the Bihar bigha, as it should be: the katha is defined as its twentieth part, so twenty of them rebuild the bigha to the last square foot. (At the West Bengal bigha the same twenty katha would be only 14,400 sq ft.)

Example 4 — 2.5 katha. Two and a half × 1,361.25 = 3,403.125 square feet (316.16 sq m; the converter's display rounds the square-feet figure to two decimals). Fractional katha are common in inheritance divisions, where a bigha is split among heirs in katha and smaller local steps below it.

Katha to square feet: the regional table

KathaThis converter (1,361.25)Bihar (1,361.25)West Bengal & Bangladesh (720)Assam (2,880)Nepal Terai (3,645)
11,361.251,361.257202,8803,645
56,806.256,806.253,60014,40018,225
1013,612.513,612.57,20028,80036,450
20 (1 bigha)27,22527,22514,40057,60072,900

Every column is the same count of katha; only the local size of the unit changes. The first two columns agree because this converter follows the Bihar convention exactly. Before using any katha figure — from a deed, an advertisement or a relative's memory — establish which column the land lives in. The district of the land, not the location of the person quoting it, decides.

Where this conversion earns its keep

Property transactions in the east are the daily case: plots in Patna are sold in katha, plots in Kolkata in katha (locally often spelled cottah), and a buyer comparing the two cities is comparing two different units wearing one name — exactly the trap the regional table disarms. Agricultural records are the second case: holdings in bigha and katha must become square feet or acres for loans, compensation and sales to outsiders. The third is the diaspora case: a family in London or Toronto inherits "12 katha in Bihar" and cannot even picture the land until it is 16,335 sq ft (12 × 1,361.25) — exactly 0.375 acre — at which point it becomes a real asset with a real size.

Common mistakes

Using a katha figure without its region. This is not a rounding error; it is a five-fold error. 10 katha is 7,200 sq ft in Dhaka and 36,450 sq ft in the Nepal Terai. No other common land unit punishes an unstated assumption this hard. Region first, factor second, arithmetic last.

Assuming the converter's 1,361.25 is "the" katha. It is the Bihar convention — exact there, but still only one column of the regional table. The honest answer to "how many square feet in a katha?" is "where?" — any source that gives one number without a region is quietly choosing a column of the table for you.

Confusing katha with marla because the numbers match. A Bihar katha (1,361.25 sq ft) and a 5 marla plot (also 1,361.25 sq ft) are identical in area, but they belong to different systems on opposite sides of the subcontinent. The match is a coincidence of the two systems' definitions; documents from one system should never be "corrected" into the other.

Mixing spellings and sub-units. Katha appears as cottah, katha, kattha and kata in records, and below it sit smaller local units (dhur in Bihar and Nepal, chatak in Bengal) whose ratios also vary by district. Spellings do not change the area, but sub-unit conversions taken from the wrong district's table do.

Using this converter, step by step

Type the area in katha — decimals such as 2.5 are fine — and press Calculate. The large first row gives square feet at the converter's factor of 1,361.25 sq ft per katha; below it, the same land in square metres; and the note records the conversion used, so anyone reading the result can see which katha it assumes. Reset restores the opening 1 katha and clears the result. Nothing changes while you type: the figure updates only when Calculate is pressed. If your land follows a different regional katha, use the regional table above with the same multiplication.

A longer example: pricing "8 katha" twice

A seller offers 8 katha of land near Patna. At the converter's factor: 8 × 1,361.25 = 10,890 sq ft (exactly a quarter of an acre), and the price per square foot can be compared with any other plot in the city. A second seller, in Sylhet, Bangladesh, also offers "8 katha" — at the Bangladeshi 720 sq ft, that is 5,760 sq ft, a little over half the land for the same headline figure. Neither seller is lying; the unit is simply local. The conversion — with the region attached — is what turns two identical-sounding offers into two honest prices.

The katha among its neighbours: the dhur below it

Bihar's ladder has a rung below the katha that deeds use constantly: the dhur, twenty of which make one katha. On this converter's Bihar katha of 1,361.25 sq ft, one dhur is 1,361.25 ÷ 20 = 68.0625 square feet — about the floor of a small room, which is why shares and strips are still reckoned in dhur. A deed entry of "3 katha 7 dhur" therefore reads: 3 × 1,361.25 + 7 × 68.0625 = 4,083.75 + 476.4375 = 4,560.19 square feet (4,560.1875 before the display rounds it). Entries like this are the everyday reality of Bihar land records, and the method never changes: value each rung by the local katha, then add.

The same twenty-to-one shape holds wherever the bigha system runs — twenty katha to the bigha, twenty dhur to the katha — but every rung's size travels with the local katha, so a West Bengal dhur (720 ÷ 20 = 36 sq ft) is barely half a Bihar one. The structure is portable across the east; the numbers are not, and the deed's district decides them.

Key terms

  • Katha (cottah, kattha): a land unit equal to one twentieth of a bigha; its square-foot value is regional — 1,361.25 sq ft in this converter (the exact Bihar convention), 720 sq ft in West Bengal and Bangladesh, about 2,880 in Assam, about 3,645 in Nepal's Terai.
  • Bigha: the parent unit of the katha; 1 bigha = 20 katha, with the bigha's own size also set regionally.
  • Dhur: a smaller unit below the katha in Bihar and Nepal (commonly 20 dhur to a katha, with its own local variations).
  • Chatak: a smaller Bengali unit below the katha (commonly 16 chatak to a katha in West Bengal usage).
  • Square foot: the common measuring unit all of these are converted into for pricing and building.

Related converters

Frequently asked questions

How many square feet are in one katha?

It depends on the region, because the katha is a twentieth of the local bigha and the bigha varies. This converter uses 1,361.25 square feet per katha, the exact Bihar convention. In West Bengal and Bangladesh one katha is usually 720 square feet, in Assam about 2,880, and in Nepal's Terai about 3,645.

What is 5 katha in square feet?

At this converter's factor, 5 katha is 6,806.25 square feet: 5 × 1,361.25 = 6,806.25. In West Bengal or Bangladesh, where a katha is 720 square feet, 5 katha would be 3,600 square feet instead — always convert with the factor of the land's own region.

How many katha make one bigha?

Twenty katha make one bigha everywhere the system is used — the katha is defined as a twentieth of the bigha. What changes by region is the size of the bigha itself: 27,225 square feet in Bihar, 14,400 in West Bengal and Bangladesh, and larger in Assam and Nepal.

Why does this converter use 1,361.25 square feet per katha?

Because it follows the Bihar convention exactly: one katha there is one twentieth of a 27,225 square foot bigha, and 27,225 ÷ 20 = 1,361.25. The note under the result states the factor openly, so any figure the converter gives can be checked against the deed's own region.

How many katha are in one acre?

At this converter's factor, one acre is exactly 32 katha: 32 × 1,361.25 = 43,560 square feet. In West Bengal and Bangladesh terms, at 720 square feet per katha, an acre is exactly 60.5 katha.

Is a katha the same as 5 marla?

In area, exactly: a Bihar katha is 1,361.25 square feet, and 5 marla of the Punjab system is also 1,361.25 square feet (5 × 272.25). They are the same area but different units from different regions and systems, so a document should always keep the unit it was written in.

How do I convert katha to square feet for West Bengal or Bangladesh land?

Multiply the katha by 720 instead of 1,361.25. For example, 10 katha in Kolkata or Dhaka is 7,200 square feet. The method is identical to this converter's; only the regional factor changes, which is why the region must be settled before the arithmetic starts.