🔄 Square Meters to Square Feet Converter
Square Meters To Square Feet Converter
Apartment sizes, office plans and many land documents are quoted in square meters, while buyers often think in square feet. Multiplying by 10.7639 converts between the two.
Enter the square meters and the equivalent square footage appears at once, ready for comparisons and listings.
The conversion every cross-border listing needs
Square metres are the world's default area unit; square feet are North America's. Sooner or later every metric area meets an audience that thinks in feet — the flat listed in both Berlin and Boston, the villa measured by a Spanish agent and read by a Texan buyer, the warehouse spec written in one system and budgeted in the other. This converter performs the single most requested journey between the two systems: square metres in, square feet out, with nothing else in the way.
The factor and its origin
Square feet = Square metres × 10.7639
The number is not arbitrary. The international foot is defined as exactly 0.3048 metres, so one metre is 1 ÷ 0.3048 = 3.280839… feet. An area conversion squares the length factor: 3.280839…² = 10.763910… square feet in a square metre. The calculator carries the factor as 10.7639 — the true value to four decimals — and the accuracy note at the bottom of this page is candid about the one place that rounding ever peeks through.
For mental arithmetic, two approximations bracket the truth: multiplying by 10.75 is within a tenth of a percent, and "times ten, then add a tenth of the result" (× 11, minus a touch) lands close. But for a listing, a lease or a materials order, use the calculator's figure.
Worked example — the calculator's own default
The calculator opens with 10 square metres — a small bedroom, a parking bay, a home office:
- Square feet = 10 × 10.7639 = 107.64 sq ft (the main result)
- Conversion used: 1 sq m = 10.7639 sq ft
Ten square metres is a useful calibration point: if a room's metric size multiplied by roughly eleven surprises you, remember the square metre is a genuinely bigger tile than the square foot — each one holds nearly eleven of them.
Worked examples — rooms and homes
A 20 m² room (5 m × 4 m): 20 × 10.7639 = 215.28 sq ft. In feet that is a room about 16.4 × 13.1 ft — the multiplication happens on the area, once, which is exactly why it must not be done to the dimensions separately.
An 85 m² apartment: 85 × 10.7639 = 914.93 sq ft. This is the conversion behind a thousand dual-market listings; note that 914.93 is also what the exact factor gives at this size, so at apartment scale the calculator and the textbook agree completely.
A 100 m² house: 1,076.39 sq ft. The neighbourhood of this figure — a hundred square metres is a thousand square feet, plus 76 — is the single most useful anchor in the whole topic.
A 500 m² commercial floor: 5,381.95 sq ft on this calculator. Hold that figure for the accuracy section: it is one of the rare everyday inputs where the calculator's four-decimal factor and the exact factor part company by a hundredth.
Reference table — square metres to square feet
| Square metres | Square feet (this calculator) | Roughly |
|---|---|---|
| 1 | 10.76 | a large bath towel |
| 2 | 21.53 | a shower enclosure |
| 5 | 53.82 | a box room |
| 10 | 107.64 | the default — a small bedroom |
| 20 | 215.28 | a 5 m × 4 m room |
| 30 | 322.92 | a studio flat |
| 50 | 538.19 | a one-bedroom flat |
| 75 | 807.29 | a family kitchen-diner |
| 85 | 914.93 | a mid-size apartment |
| 100 | 1,076.39 | a family house |
| 150 | 1,614.59 | a large house |
| 200 | 2,152.78 | — |
| 250 | 2,690.98 | — |
| 500 | 5,381.95 | a commercial floor |
| 1,000 | 10,763.9 | a warehouse unit |
Every figure is this calculator's own output (× 10.7639, two decimals), so the table and the tool can never disagree. The 30 m² row is included because it is the studio-flat threshold in many cities' listings, and the 1,000 m² row because it shows the factor working cleanly at four figures: 10,763.9 exactly as the panel displays it.
Going back, and going further
The reverse journey divides by the same factor: square feet ÷ 10.7639 = square metres, which is what the Square Feet Converter's hero row does with its × 0.092903 (the same relationship from the other side). If you need the area in yards, acres or hectares as well, the Square Meter Converter fans one input out into all four, and the Area Converter covers the full seven-unit family. What you should not do is chain conversions by hand — square metres to feet via yards, say — because each hop invites its own rounding; one multiplication by the right factor is both faster and truer.
A word about how homes are measured
A conversion is only as honest as the figure fed into it, and housing figures are measured to different standards in different countries. Some listings quote gross external area (walls included), others net internal living space; some count balconies, basements and garages, others exclude them. Two flats can both be "100 m²" and differ by a room — and both will convert, faithfully, to different-feeling square footages. When comparing across borders, convert first and then ask what was measured; the calculator guarantees the arithmetic, not the estate agent.
Common mistakes
- Multiplying by 3.28. That is the length factor (metres → feet). Areas need it squared: × 10.7639. The × 3.28 slip makes a 100 m² house into "328 sq ft" — a third of its true size.
- Dividing instead of multiplying. Going from the bigger tile (m²) to the smaller (sq ft) must make the number grow — roughly eleven-fold. A result smaller than your input means the operation ran backwards.
- Converting dimensions with the area factor. A 5 m × 4 m room is 20 m² = 215.28 sq ft. Multiplying 5 and 4 by 10.7639 first, then by each other, applies the factor twice and invents a 2,318 sq ft room.
- Rounding the factor for big jobs. Using × 10.76 for a 10,000 m² development throws away about 39 sq ft of area; using × 10 throws away 763.9 sq ft per 1,000 m². The full factor costs nothing.
- Expecting the panel to show more decimals. Results are displayed to two decimals — ample for areas — and the Copy button returns the same two-decimal value on this page, since the hero is the only computed row.
Key terms
- Square metre — a square 1 m × 1 m; = 10.7639 sq ft here.
- Square foot — a square 1 ft × 1 ft; 0.3048 m on each side by definition.
- Conversion factor — 10.7639: the length factor 3.28084 squared, carried to four decimals.
- Gross vs net area — measurement conventions (walls/balconies in or out) that change the input, not the conversion.
Related tools
The Square Meter Converter adds yards, acres and hectares to the same input; the Square Feet Converter runs the reverse direction with five outputs; the Area Converter covers the whole family; and the Square Yard Converter serves readers whose other unit is yards.
Frequently asked questions
What does the Square Meters to Square Feet Converter do?
It multiplies a square-metre area by 10.7639 to give square feet — the one journey between the world's default area unit and North America's. Enter the square metres, click Calculate, and read the square feet as the main result.
How many square feet are in a square metre?
10.7639. A metre is 3.28084 feet, and an area factor is the length factor squared: 3.28084² = 10.763910…, which this calculator carries as 10.7639. So 1 m² shows 10.76 sq ft and 10 m² shows 107.64 sq ft.
Can you give a worked example?
An 85 m² apartment is 85 × 10.7639 = 914.93 sq ft. A 100 m² house is 1,076.39 sq ft, and a 20 m² room (5 m × 4 m) is 215.28 sq ft. The calculator opens on 10 m² = 107.64 sq ft, a typical small bedroom.
How do I convert square feet back to square metres?
Divide by 10.7639 — or multiply by 0.092903, the same relationship from the other side. The Square Feet Converter does it directly: 1,000 sq ft comes back as 92.9 m².
Why does this page use 10.7639 and not 10.764 or 10.76?
Because the exact factor is 10.763910…, so 10.7639 is the honest four-decimal form. Shorter versions cost real area at scale: × 10.76 loses about 3.9 sq ft per 1,000 m², and × 10 loses 763.9 sq ft per 1,000 m².
Does 500 square metres equal 5,381.95 or 5,381.96 square feet?
Both, depending on the factor's precision. This calculator's 10.7639 gives 5,381.95; the unrounded factor gives 5,381.96. The difference — one hundredth of a square foot on a commercial floor — is the only place the four-decimal factor shows, and it is far below any real measurement error.
How accurate is this converter?
Its factor is the defined relationship (a foot is exactly 0.3048 m) carried to four decimals, and results are computed and displayed at two decimals. At home and apartment sizes its output matches the exact-factor result to the last digit; at 500 m² and beyond they can differ by 0.01 sq ft, as the guide's example shows.







































