📦 Volume Calculator
Volume Calculator
Volume tells you how much three-dimensional space a shape occupies — essential for shipping boxes, mixing concrete, sizing water tanks or filling a pool. Pick the shape below and enter its measurements.
All dimensions must use the same unit: if length is in centimetres, the volume comes out in cubic centimetres. Mixing units (metres with centimetres) is the classic volume mistake.
How to use this calculator
Choose the shape card - rectangular box, cylinder or sphere - and enter its measurements. Every card returns the volume instantly.
- Pick the right card for your shape: Rectangular box, Cylinder or Sphere.
- Fill in the card's fields, such as Length, Width and Height for the box, or Radius and Height for the cylinder.
- Keep all measurements in the same unit - mixing metres and centimetres is the classic volume mistake.
- Press Calculate and read the volume; adjust a dimension and recalculate to plan different sizes.
Getting Accurate Results From the Volume Calculator
Accuracy starts with inputs: use consistent units, enter real measured values instead of guesses, and re-check any default the tool pre-fills. The Volume Calculator handles the math; your job is giving it good numbers.
Which shapes does this volume calculator cover?
The page covers three solids: a rectangular box from length, width and height; a cylinder from radius and height; and a sphere from radius alone. Each shape is a separate card with its own fields.
Volume is counting cubes
Every volume on this page answers one question: how many unit cubes fit inside this shape? For a box the count is easy — length × width × height. Curved shapes cheat the same answer out of π: a cylinder is a circle's area extruded through its height, a cone is exactly one third of that cylinder, and a sphere packs (4/3)πr³ into its round frame. Pick your shape above, enter what you measured, and mind the units — a volume in cubic centimetres is a millilitre, and a thousand of them make a litre.
| Shape | Volume formula | You measure |
|---|---|---|
| Rectangular box | l × w × h | Length, width, height |
| Cube | a³ | One edge |
| Cylinder | π r² h | Radius, height |
| Cone | (1/3) π r² h | Radius, height |
| Sphere | (4/3) π r³ | Radius |
| Hemisphere | (2/3) π r³ | Radius |
| Square pyramid | (1/3) × base² × h | Base side, height |
| Triangular prism | (½ × base × triangle height) × length | Triangle base and height, prism length |
Worked example: a cylinder with radius 3 and height 5
Step 1 — area of the circular base: π × 3² = 28.27.
Step 2 — extrude it through the height: 28.27 × 5 = 45π ≈ 141.37 cubic units.
Now compare its neighbours: a cone of radius 3 and height 10 holds 30π ≈ 94.25, and a sphere of radius 3 holds (4/3)π × 27 = 36π ≈ 113.10. A plain box of 5 × 4 × 3 holds 60, and a cube of side 4 holds 4³ = 64. A hemisphere of radius 3 — half the sphere — holds 18π ≈ 56.55.
Why the unit selector matters more than it looks
Volume punishes sloppy units harder than any other quantity on this page, because the conversion factor gets cubed. One metre is 100 centimetres, but one cubic metre is 100³ = 1,000,000 cubic centimetres. Measure a fish tank in centimetres and a warehouse in metres, and a single forgotten conversion is off by a million. Choose the unit next to each measurement and the calculator carries the cubing for you.
The shape nobody expects: the triangular prism
A triangular prism — a tent, a Toblerone bar, a roof — is a triangle dragged through a length. Its volume is the triangle's area times that length: a triangular face 6 wide and 4 high (area 12) dragged through a length of 10 gives 120 cubic units. Getting the triangle's vertical height (not the slanted side) is the only trap, and it is the same trap as in every triangle area.
Frequently asked questions
What is the volume of a cylinder with radius 3 and height 10?
π r² h = π × 9 × 10 = 90π ≈ 282.74 cubic units. A cone with the same base and height holds exactly a third of that — about 94.25 — and a sphere of radius 3 holds 36π ≈ 113.10.
How many litres is a volume in cubic centimetres?
Exactly one millilitre per cubic centimetre, so divide by 1,000. The cylinder above, if measured in centimetres, holds 282.74 cm³ ≈ 0.283 litres. The result-unit selector converts for you.
Why is a cone exactly one third of a cylinder?
It is a theorem, not a coincidence: any cone (or pyramid) with the same base and height as its matching cylinder (or box) holds precisely one third of the volume. Fill a cone with water three times and you fill the cylinder once — the formula (1/3)πr²h records that fact.
What extra measurements does a frustum need?
A conical frustum — a bucket shape — needs both end radii plus the height: the formula averages the two circular ends with a geometric twist, V = (1/3)πh(R² + Rr + r²). Measure the top and bottom circles separately; guessing one from the other is the commonest bucket-calculation error.
Can the calculator tell me how much the contents weigh?
With the density option, yes: volume × density gives mass. Water at 1 g/cm³ makes the arithmetic invisible (282.74 cm³ of water weighs about 282.74 g), but sand, oil or concrete each need their own density — pick the material or type a custom value.







































