🆕 Newly Added Calculators:

🔄 Cent to Square Meter Converter

Muhammad Yasir Yasin
By Muhammad Yasir Yasin · Updated 12 Nov 2026 Founder · 20 Year+ Telecom + IT Expert
Muhammad Yasir Yasin

Muhammad Yasir Yasin

Founder, metacalculator.org

Muhammad Yasir Yasin is a Telecom + IT expert from Pakistan with 20+ years of proven experience — the career documented on his LinkedIn. He has been in pure IT since 1998, and works as a crypto consultant & trader since 2016. He is the founder of metacalculator.org, seotools.metacalculator.org (SEO Tools) and metatrendonline.com (Digital Products Market Place): free tools built to give clear, checked answers, with no sign-ups and no paywalls.

Every calculator here is built from the published formula, tested by hand, and explained in plain words.

Cent To Square Meter Converter

Result

Cent is a traditional land unit still used for plots in parts of South India, equal to one hundredth of an acre. This converter turns cent into square meters and square feet.

Both modern units appear at once, so old records and new listings can be compared without a second lookup.

Cent to square metres: South India's plot unit meets the metric world

Travel to Kerala, Tamil Nadu, Andhra Pradesh, Telangana or coastal Karnataka with an eye for land, and the unit of conversation is the cent. Plots are advertised in cents, family land is remembered in cents, and a house site of "5 cents" needs no explanation locally. But the moment that land meets a metric document — a building plan filed in square metres, a bank valuation, a listing aimed beyond the region — the cent has to be translated, and the translation runs through the acre it was carved from.

The fixed steps are these: one cent is exactly one hundredth of an acre, and one acre is 4,046.86 square metres, so one cent = 40.4686 square metres — and, for those working in feet, 435.6 square feet. This converter applies the square-metre step and shows the square feet alongside, because a cent figure usually has to survive in both worlds at once.

A unit defined by the acre

The cent is unusual among traditional units in having no rod, no rope and no ancient standard behind it: it is a decimal slice of the imperial acre, defined when survey practice in the south married local land dealing to a metric-friendly fraction. One acre = 100 cents exactly. That single definition generates everything on this page:

  • 1 cent = 1/100 acre = 435.6 sq ft = 40.4686 sq m
  • 1 cent = 48.4 square yards (gaj)
  • 1 cent = 1.6 marla of the Punjab system, exactly (435.6 ÷ 272.25)

Kerala's records also use the are (100 sq m) alongside the cent: one are is about 2.47 cents. Tamil Nadu adds the ground (2,400 sq ft, about 5.51 cents) in Chennai-area dealing, and Andhra Pradesh the ankanam (72 sq ft, so about 6.05 ankanam to the cent). The cent sits at the centre of this southern family as its most portable member — the only one defined purely by the acre.

The formula

Square metres = Cent × 40.4686

Square feet follow by the parallel step, cent × 435.6. To come back, divide square metres by 40.4686. Because the cent is an exact hundredth of an acre, chains also close exactly: cents ÷ 100 gives acres, and acres × 4,046.86 gives square metres — both routes must agree, which makes the cent unusually easy to audit.

Worked examples

Example 1 — the converter's own default. The calculator opens with 1 cent: 1 × 40.4686 = 40.4686 square metres (shown as 40.47 at the result box's two decimals), and 435.6 square feet. One cent is a square about 6.36 metres on each side — a single room's footprint, which is why house plots are counted in several cents.

Example 2 — the classic 5 cent house site. Five × 40.4686 = 202.34 square metres (2,178 sq ft) — the standard residential plot across much of Kerala and Tamil Nadu, big enough for a house and a small yard, and the size behind a large share of the region's home construction.

Example 3 — 10 cents. Ten × 40.4686 = 404.69 square metres (4,356 sq ft) — one tenth of an acre exactly. At this size the plot is equally at home described as 10 cents, 0.1 acre or 404.69 sq m, and the three figures should always convert into each other without residue.

Example 4 — a quarter acre in cents. Twenty-five cents is 25 × 40.4686 = 1,011.72 square metres (10,890 sq ft) — exactly a quarter of an acre, a holding size that appears constantly in partition deeds. Note the pattern: because the cent is a hundredth, quarter and half acres land on whole cents (25 and 50), which is precisely why the unit survives.

Cent to square metre conversion table

CentSquare metresSquare feetAcres
140.47435.60.01
280.94871.20.02
2.5101.171,0890.025
5202.342,1780.05
10404.694,3560.1
20809.378,7120.2
251,011.7210,8900.25
502,023.4321,7800.5
1004,046.8643,5601

The table's square-metre column is rounded to two decimals, as the converter displays it; the underlying factor is 40.4686 exactly per cent, and the 100-cent row closes the loop at the acre's 4,046.86 sq m.

Where this conversion earns its keep

Building approvals are the first destination: plans across the south are drawn and sanctioned in square metres, so the plot a family calls "6 cents" enters its own building file as 242.81 sq m (6 × 40.4686) before a single room is drawn. The second is registration and valuation, where guidance values are published per square foot or per square metre while the deed speaks in cents — every rate must pass through this conversion before it prices anything. The third is the wider market: a buyer from Bengaluru comparing a Kerala plot with a Karnataka site quoted in square feet, or an NRI buyer thinking in square metres from a lifetime abroad, meets the cent only through its conversions.

Common mistakes

Dropping the decimals of 40.4686. "About 40 square metres per cent" is fine across a table and expensive across a title deed: at 40 flat, a 50 cent plot loses 23.43 sq m — over 250 sq ft — on paper. The factor carries four decimals because the acre it comes from does; documents deserve all four.

Confusing cents with ares. Kerala uses both. One are is 100 sq m; one cent is 40.4686 sq m; so an are is about 2.47 cents, and treating the words as synonyms more than doubles or halves a plot depending on direction. When a Kerala document mixes them, convert each entry by its own unit before adding anything.

Reading cent as a currency or a percentage. The land cent is neither: it is 1/100 of an acre of land. In a deed the context makes this plain, but in hurried conversation — "the plot is 8" — the unit word carries the whole meaning and should never be dropped.

Assuming the cent is used all over India. It is a southern unit. Punjab deals in marla and kanal, the east in katha and bigha, Maharashtra largely in square feet, guntha and acres. A cent figure quoted outside the south will usually need its definition attached — which is the acre-based one on this page.

Using this converter, step by step

Type the area in cents — fractions like 2.5 or 7.75 are welcome — and press Calculate. The large first row gives square metres, and beneath it the same land in square feet, followed by the note: 1 cent = 40.4686 sq m. Reset restores the opening 1 cent and clears the result. Nothing changes while you type: results update only when Calculate is pressed, so the figure on screen always belongs to the input you last confirmed.

A longer example: a 12.5 cent family plot, divided three ways

A family near Kochi holds 12.5 cents and is partitioning it among three heirs with a surveyor's help. Total area first: 12.5 × 40.4686 = 505.86 square metres (5,445 sq ft — incidentally, exactly one Punjab kanal, a reminder that the southern and northern systems measure the same subcontinent). Divided equally, each share is about 4.17 cents, or 168.62 sq m (505.86 ÷ 3). The partition deed will carry cents for the family's fluency, square metres for the plan approval, and square feet for the valuator — three languages, one plot, and every figure chained to the same 40.4686.

Mental maths shortcuts

Multiply by 40, then add a little over 1% — precisely, add the cent figure × 0.4686. For 8 cents: 8 × 40 = 320, plus 8 × 0.4686 ≈ 3.75, gives 323.75 sq m (the table-exact value is 323.7488). Or work through square feet, which some people find friendlier: cents × 435.6, then × 0.09290304 to reach square metres — the same destination, and a good check that no factor was garbled on the way.

A house rises on cents: one plot through its numbers

Follow a single purchase. A family buys 7.5 cents outside Kochi: 7.5 × 40.4686 = 303.51 square metres, or 7.5 × 435.6 = 3,267 square feet of land. The architect's sanctioned plan works in square metres, so the plot enters the file as 303.51 sq m; the family's own diary keeps it as 7.5 cents; the bank's valuator records 3,267 sq ft. When the design settles on a ground-floor footprint of 1,800 sq ft, the land left open is 3,267 − 1,800 = 1,467 sq ft — the courtyard, the well, the setback — a figure nobody quoted at the sale and everybody needs by the second meeting with the builder.

Every one of those numbers is the same land, and every one was produced by this page's single factor. That is the quiet work of a unit defined cleanly from the acre: nothing is lost between the deed, the plan and the loan file, provided the 40.4686 is carried at full length each time.

Key terms

  • Cent: a land unit of South India, exactly one hundredth of an acre = 435.6 sq ft = 40.4686 sq m.
  • Acre: 43,560 sq ft = 4,046.86 sq m = exactly 100 cents.
  • Are: a metric unit of 100 sq m used in Kerala records; about 2.47 cents.
  • Ground: a Tamil Nadu unit of 2,400 sq ft, about 5.51 cents.
  • Ankanam: an Andhra Pradesh unit of 72 sq ft; about 6.05 ankanam make one cent.
  • Square metre: the metric area unit of plans and approvals; 1 sq m ≈ 10.7639 sq ft.

Related converters

Frequently asked questions

How many square metres are in one cent?

One cent is 40.4686 square metres. A cent is exactly one hundredth of an acre, and an acre is 4,046.86 square metres, so one cent is 4,046.86 ÷ 100 = 40.4686 sq m. It is also 435.6 square feet.

What is 5 cents in square metres?

5 cents is 202.34 square metres: 5 × 40.4686 = 202.343, shown as 202.34. That is 2,178 square feet — the classic house-plot size across Kerala and Tamil Nadu.

How many cents make one acre?

Exactly 100 cents make one acre — that is the definition of the cent. So a quarter acre is 25 cents, half an acre is 50 cents, and any acreage becomes cents by multiplying by 100.

Where is the cent used as a land unit?

Mainly in South India: Kerala, Tamil Nadu, Andhra Pradesh, Telangana and parts of Karnataka, for residential plots and family land. Other regions of India use their own units — marla and kanal in Punjab, katha in the east, guntha in Maharashtra.

How do I convert square metres back to cents?

Divide the square metres by 40.4686. For example, 500 sq m ÷ 40.4686 ≈ 12.36 cents. Or go through acres: square metres ÷ 4,046.86 gives acres, and acres × 100 gives cents.

Is a cent the same as an are?

No. An are is 100 square metres, while a cent is 40.4686 square metres — so one are is about 2.47 cents. Both appear in Kerala land records, and mixing them up more than doubles or halves the plot on paper.

What is 10 cents in square feet and acres?

10 cents is 4,356 square feet (10 × 435.6) and exactly 0.1 acre, since 10 cents is one tenth of the 100 cents in an acre. In square metres it is 404.69.