☀️ Solar Calculator
Solar Calculator
Size a rooftop system from your monthly units or bill, estimate its 2026 installed cost and monthly generation, and work out net billing savings and payback under NEPRA's Prosumer Regulations 2026.
Net billing: imports are billed at your full tariff and exports credited separately at the NAEPP — the rule for all new prosumers since February 2026. Self-consumption: the share of your solar generation your home uses directly, and the most valuable share. Payback period: total system cost divided by monthly saving.
What this calculator tells you
Two questions decide every rooftop solar decision in Pakistan, and this calculator answers both. How big a system do you need? — that is Mode A, which turns your monthly units (or your monthly bill) into a recommended system size in kilowatts, an estimated installed cost, and the units that system should generate in an average month. What will it actually save you? — that is Mode B, which runs a system size through the billing rules that apply to new solar customers today and returns your estimated net monthly bill, your monthly saving, and the payback period: how long the system takes to earn its own cost back.
The second question matters more than it used to, because the rules underneath it changed in February 2026. If you have read older guides — or been quoted savings by an installer working from an old spreadsheet — you have seen numbers built on net metering, where every unit you exported cancelled a unit you imported. That system is closed to new customers. Everything on this page is built on what replaced it.
How big a system do you need?
A solar system's size is its panel capacity in kilowatts (kW). What a kilowatt produces in Pakistan is the foundation of every figure here: across the big cities, one kilowatt of well-sited panels generates roughly 4.4 to 4.7 units a day on annual average, after normal inverter, heat and dust losses — satellite-sunlight (PVGIS) figures for Islamabad, Karachi and Lahore sit in that band. This calculator uses 4.5 units per kW per day as its default, and the field is editable if your city or roof differs. Multiply by 30 and one kilowatt makes about 135 units in an average month.
Sizing is then simple division. A home using 600 units a month needs 600 ÷ 135 ≈ 4.44 kW of production, and because systems are supplied in practical steps, the calculator rounds up to the nearest half kilowatt — 4.5 kW — which should generate about 608 units in an average month. Rounding up, not down, is deliberate: a system sized below your usage leaves the most expensive slab units on your bill, while a modest surplus is merely exported at the low credit rate.
If you know your bill better than your units, Mode A can start from the bill instead: it divides the bill by your average grid rate to estimate units. That average rate is a blunt instrument — a real bill mixes slab rates, taxes, fixed charges and fuel adjustments — so if your bill shows units (every DISCO bill does), prefer the units figure.
One more sizing consideration belongs to the new rules, and it cuts the other way: under net billing, oversizing is punished. Generation you cannot use yourself is sold to the grid at roughly a fifth of what grid power costs you. A system matched to your daytime usage earns far more per rupee than a giant system matched to your total usage. If most of your consumption is after sunset — air conditioners through the night — either plan to shift load into daylight hours, or size for the daytime share and let the grid carry the night.
What a system costs in 2026
Installed prices in Pakistan in 2026 run roughly Rs 100,000 to Rs 160,000 per kW for a residential on-grid system — panels, inverter, mounting structure, wiring, protection and labour included — with the spread driven by panel brand and tier, inverter make, roof structure, and city. This calculator's default of Rs 130,000 per kW sits mid-range and agrees with the defaults other careful 2026 market guides use; it is an editable field precisely because quotes for the same size vary so widely (published 5 kW on-grid quotes this year range from about Rs 500,000 to Rs 850,000). Hybrid systems with batteries cost materially more — the battery is a second purchase, and this calculator prices the on-grid case; if you are quoted a hybrid, enter its real per-kW cost in the field.
On top of the installer's price sit the regulatory costs of exporting. Under the Prosumer Regulations 2026 there is a concurrence fee of Rs 1,000 per kW, which this calculator adds as its own line so you can see it. Your DISCO's application processing and bidirectional (green) meter charges are separate again, are commonly quoted apart from the system price, and vary — budget for them, and get them in writing from your installer before you sign, because a quote that looks cheap by excluding every fee is a common sales pattern.
Net metering is over for new customers — what net billing does instead
From 9 February 2026, NEPRA's Prosumer Regulations 2026 (S.R.O. 251(I)/2026) replaced the 2015 net metering framework with net billing for new applicants. Customers whose net metering agreements were signed before that date keep their old one-to-one terms until those agreements expire; everyone applying now is a net billing customer. New prosumer agreements run for five years.
The mechanics differ in one crucial way. Under net metering, the meter effectively ran backwards: exported units offset imported units one-for-one, so an exported unit was worth whatever a unit cost you — Rs 25 or more in the final years, and far more at today's upper slab rates. Under net billing, the two flows are priced separately:
- Imported units are billed at your normal consumer tariff, slab by slab, exactly as if you had no panels — commonly Rs 40–55 per unit all-in at household consumption levels.
- Exported units are credited at the National Average Energy Purchase Price (NAEPP) — reported at roughly Rs 10–11 per unit when the regulations were notified, with NEPRA's own 2026 power-purchase forecast putting it near Rs 8.13 per unit, and NEPRA may revise it by notification at any time. This calculator defaults the export rate to Rs 11 and lets you change it, because the figure on your own bill is the one that applies to you.
Do the arithmetic on that gap and the whole strategy of post-2026 solar falls out of it. A unit you generate and use yourself displaces a unit you would have bought at Rs 40–55: it is worth the full grid rate. A unit you export earns about Rs 8–11. The same sunshine is worth four to five times as much inside your own house as it is on the grid. Solar still pays — the worked example below pays back in a little over two years — but it pays for a different design: sized to your daytime load, with consumption deliberately shifted into generating hours.
Worked example — sizing (the calculator's Mode A defaults)
A home using 600 units a month:
- Raw requirement: 600 ÷ (4.5 × 30) = 4.44 kW, rounded up to a recommended system size of 4.5 kW.
- Panels: 4.5 kW at 585 W a panel is 7.7 panels, so about 8 panels.
- Estimated generation: 4.5 × 4.5 × 30 = 607.50 units in an average month — about 101.2% of the home's usage.
- Cost: 4.5 × Rs 130,000 = Rs 585,000, plus concurrence fee 4.5 × Rs 1,000 = Rs 4,500 — total estimated cost Rs 589,500.
Double the house — 1,200 units a month — and the same steps give a raw 8.89 kW, a recommended 9 kW, about 16 panels, 1,215 units a month of generation, and a total of Rs 1,179,000 (Rs 1,170,000 + Rs 9,000 fee). Notice the cost per useful unit barely moves with size at a flat per-kW rate; in the real market, larger systems usually quote a little cheaper per kW, which the editable cost field lets you reflect.
Worked example — net billing savings and payback (Mode B defaults)
Take a 5 kW system on a home using 800 units a month, generating 5 × 4.5 × 30 = 675 units in an average month, with 70% of that solar used in the home and 30% exported, imports at an average Rs 50 a unit and exports credited at Rs 11:
| Line | Units | Money (Rs) |
|---|---|---|
| Solar used yourself (70%) | 472.50 | — |
| Exported to the grid (30%) | 202.50 | — |
| Units still imported (800 − 472.50) | 327.50 | — |
| Bill for imported units (327.50 × 50) | — | 16,375.00 |
| Export credit (202.50 × 11) | — | −2,227.50 |
| Net monthly bill | — | 14,147.50 |
| Bill without solar (800 × 50) | — | 40,000.00 |
| Monthly saving | — | 25,852.50 |
The system costs 5 × Rs 130,000 + 5 × Rs 1,000 = Rs 655,000, so the payback period is 655,000 ÷ 25,852.50 ≈ 25.3 months — about 2.11 years. After that, the monthly saving is yours for the remaining life of the panels.
Two comparisons teach more than the headline. Under the old net metering, the same month would have been billed on 800 − 675 = 125 net units — a bill of Rs 6,250 at the same average rate. Net billing's Rs 14,147.50 is more than double that; anyone quoting you old-rule savings is quoting a system that no longer exists. And if the export rate falls to NEPRA's forecast Rs 8.13, the credit drops to Rs 1,646.33, the net bill rises only to Rs 14,728.67, the saving to Rs 25,271.33 and payback to about 2.16 years — a small change, because exports are now the garnish, not the meal. What moves payback is the 70%: raise self-consumption to 80% on the same system and you displace another 67.50 imported units a month at Rs 50 each.
Raising your self-consumption — where the money now is
Since a self-used unit is worth roughly Rs 40 more than an exported one, behaviour is a financial feature of the system:
- Run heavy loads at midday. Washing machines, water pumps, irons and dishwashers scheduled between 10 a.m. and 3 p.m. consume sunshine that would otherwise leave at Rs 11.
- Pre-cool the house. Run air conditioning harder in the late afternoon while panels still produce, so the evening draw from the grid is smaller. Solar cannot touch the evening peak directly — the sun is down and the peak slab is the expensive one — unless you add a battery.
- Size honestly. If nobody is home in the day and nothing can be shifted, a smaller system with a high self-use share beats a large system exporting half its output.
- Consider a battery only for the right reason. Storage lets you spend your own solar after dark, and hybrid systems are the market's answer to load-shedding — but the battery adds a large cost for the units it actually shifts. Buy it for backup and for peak-shaving, with your eyes open about what it does to payback.
Common mistakes
- Believing one-for-one netting still exists. For new connections it ended on 9 February 2026. Any sizing, saving or payback figure that nets exported units against imported units at the same value is describing the old system.
- Oversizing for export. At an Rs 8–11 credit against Rs 40–55 imports, capacity installed mainly to export earns back its cost very slowly. Size to daytime use first.
- Comparing quotes on size alone. A cheap 5 kW quote may use lower-tier panels, a smaller inverter or exclude structure, wiring, protection and every fee. Compare per-kW, like-for-like, and get the concurrence fee, DISCO charges and meter cost in writing.
- Treating the average month as every month. Generation follows the seasons — strongest around April to June, weakest in December and January, and monsoon cloud cuts into it too. The defaults here are annual averages; a system that "covers" your usage on average will still import more in winter.
- Forgetting the sanctioned load and the agreement. Exporting requires a prosumer agreement with your DISCO and a bidirectional meter, and your sanctioned load limits what you may install. The five-year agreement term matters too: the economics on this page assume the current rules run; re-check the export rate on your bill, since NEPRA revises it.
- Counting the whole bill as savable. Fixed charges, taxes and minimum charges do not vanish with solar, and units you import at night are billed normally. The calculator's single average rate is a planning simplification — your slab-by-slab bill will differ in detail.
How to use this calculator, step by step
Start in System size mode if you are shopping: enter your monthly units from your bill (or switch the basis to your monthly bill and your average rate). Adjust the generation figure if you know your city's, and the cost per kW when you have real quotes. Press Calculate — nothing changes while you type; the result updates only when the button is pressed. Read the recommended size, then the total estimated cost including the concurrence fee. Then switch to Net billing savings mode, enter the size you are considering, your monthly units, and — honestly — the share of solar your household will actually use while the sun is up. Calculate again and read the net bill, the monthly saving and the payback. Try the self-use share at 50% and at 90%: the spread between those two paybacks is the value of your own habits, priced. Reset restores the opening defaults.
Key terms
- kW (kilowatt) — a solar system's rated panel capacity; the "size" of the system. Not the same as a unit of energy.
- Unit / kWh — one kilowatt-hour of electricity; what your bill counts and what panels generate over time.
- Net metering (old) — the pre-February-2026 arrangement where exported units offset imported units one-for-one. Closed to new applicants.
- Net billing (current) — imports billed at your full tariff, exports credited separately at the NAEPP. The rule for all new prosumers.
- NAEPP (National Average Energy Purchase Price) — the rate credited per exported unit under net billing; reported around Rs 10–11 at notification, forecast near Rs 8.13 for 2026, revisable by NEPRA.
- Self-consumption — the share of your solar generation your home uses directly; the most valuable share under net billing.
- Prosumer — a consumer who also produces and exports electricity, under an agreement with their DISCO.
- Concurrence fee — the per-kW fee (Rs 1,000/kW) payable under the Prosumer Regulations 2026.
- Payback period — total system cost divided by monthly saving: the time the system takes to repay its own price.
- DISCO — your distribution company (LESCO, IESCO, K-Electric and the rest), which bills your imports, credits your exports and approves your connection.
Frequently asked questions
How many units does 1 kW of solar generate in Pakistan?
About 135 units in an average month — roughly 4.5 units a day. Satellite sunlight data (PVGIS) for Islamabad, Karachi and Lahore puts a well-sited kilowatt at about 4.4 to 4.7 units a day across the year after normal losses, with more in spring and early summer and less in mid-winter. This calculator uses 4.5 as its default and lets you change it, because roof angle, shading, dust and city all move the real figure.
What size solar system do I need for 600 units a month?
About 4.5 kW. At 135 units a month per kilowatt, 600 units needs 4.44 kW, and systems are installed in practical steps, so the calculator rounds up to 4.5 kW — roughly 8 panels of 585 W — which should generate about 607.50 units in an average month. At the 2026 default cost of Rs 130,000 per kW plus the Rs 1,000 per kW concurrence fee, that system is estimated at Rs 589,500 before DISCO application and meter charges.
Is net metering still available in Pakistan?
Not for new customers. NEPRA's Prosumer Regulations 2026 (S.R.O. 251(I)/2026), effective 9 February 2026, replaced net metering with net billing for new applicants. Homes whose net metering agreements were signed before that date keep their one-to-one terms until those agreements expire. Everyone applying now exports at the NAEPP credit rate — roughly Rs 8–11 per unit — while imports are billed at the full tariff.
What is net billing, and how is it different from net metering?
Under net metering, exported units cancelled imported units one-for-one, so an exported unit was worth your full retail rate. Under net billing the two flows are priced separately: everything you import is billed at your normal slab tariff (commonly Rs 40–55 per unit all-in for households), and everything you export is credited at the National Average Energy Purchase Price, reported around Rs 10–11 per unit in 2026 with NEPRA's forecast near Rs 8.13. A unit you use yourself is therefore worth several times an exported unit.
How long does a solar system take to pay for itself in 2026?
On this calculator's defaults — a 5 kW system at Rs 655,000 including the concurrence fee, on a home using 800 units a month, with 70% of the solar used in the home — the monthly saving is about Rs 25,852.50 and the payback is about 25.3 months, roughly 2.11 years. Payback stretches if your household is out all day (more low-value exports) and shrinks if you shift load into daylight hours or your grid rate is higher.
Why does it matter how much solar I use myself?
Because the two destinations of a solar unit pay very differently under net billing. A unit consumed in your home displaces a unit you would have bought at your grid rate — say Rs 50. A unit exported earns the NAEPP credit — say Rs 11. That is roughly a Rs 39 difference on every unit, every day, which is why this calculator asks for your self-consumption share explicitly and why daytime load-shifting is now the cheapest "upgrade" to any system.
What extra charges apply on top of the system price?
The Prosumer Regulations 2026 set a concurrence fee of Rs 1,000 per kW, which this calculator includes in the total as its own line (Rs 5,000 on a 5 kW system). Beyond that, your DISCO's application processing and bidirectional meter charges are usually quoted separately by installers and vary by company and city. Panel and system prices also move with the exchange rate, so confirm a written, itemised quote — system, structure, fees and meter — before paying anything.







































