📐 Square feet of a Rectangle Calculator
Square Feet Of Rectangle Calculator
Most rooms, yards and plots are rectangles, and their area is simply length times width. Enter both sides in feet and the calculator gives you the square footage immediately.
It also converts the result into square meters and square yards, so the number works whether you are buying paint, flooring or fence materials.
How to use this calculator
Enter the length and width in feet. The calculator returns the area in square feet, square meters and square yards.
- Type the Length in feet.
- Type the Width in feet.
- Read the square-foot area result instantly.
- Check the metric and square-yard conversions.
Getting Accurate Results From the Square feet of a Rectangle Calculator
Accuracy starts with inputs: use consistent units, enter real measured values instead of guesses, and re-check any default the tool pre-fills. The Square feet of a Rectangle Calculator handles the math; your job is giving it good numbers.
What does the Square feet of a Rectangle Calculator compute?
It finds the area of any rectangle from its length and width. You enter both in feet, and it returns square feet plus square meters and square yards.
The most measured shape on earth
Rooms, slabs, screens, plots, rugs: the rectangle is the default unit of building and buying, and its area is the friendliest formula in this category — length × width, in square feet. The questions around it are what give this page its extra modes: I know the area and one side — what is the other side? and how much of this rectangle is just its border? are rectangle questions too, and they now live here.
Worked example: a room 20 ft by 15 ft, three ways
The area: 20 × 15 = 300 sq ft — which is 300 ÷ 9 ≈ 33.33 sq yd of carpet, or 300 × 0.0929 ≈ 27.87 m².
Backwards: told the room is 300 sq ft and 20 ft long, the width is 300 ÷ 20 = 15 ft. This is the mode for checking a listing's claimed dimensions or sizing a rug to a stated area.
The border: lay a 1 ft border inside that room and the untouched middle is (20 − 2) × (15 − 2) = 18 × 13 = 234 sq ft, so the border itself is 300 − 234 = 66 sq ft. Note the 2s: a border eats from both ends of each side, the step everyone forgets exactly once.
| Mode | You enter | You get |
|---|---|---|
| Area | Length, width | Area in sq ft, sq yd and m² |
| Missing side | Area, one side | The other side |
| Border | Outer length, outer width, border width | The border's area (and the inner area) |
Measuring honestly: feet and inches
Real rooms are 12 ft 4 in by 10 ft 7 in, and pretending otherwise quietly moves a flooring order. Enter each side in feet and inches — or flip its unit to inches or yards — and the calculator converts first and multiplies second. If a room is not quite rectangular (an alcove, an L-shape), split it into two rectangles, run each, and add: every irregular floor in the world is rectangles wearing a disguise.
Frequently asked questions
How many square feet is a 12 ft by 10 ft room?
12 × 10 = 120 sq ft — about 13.33 sq yd or 11.15 m², all three shown with every result.
I know the area and the length. How do I get the width?
Divide: width = area ÷ length. A 120 sq ft room that is 12 ft long is 120 ÷ 12 = 10 ft wide. Use the "Missing side" mode.
How do I calculate the area of a border or frame?
Subtract the inner rectangle from the outer one. A 1 ft border inside a 12 × 10 room leaves a 10 × 8 middle (80 sq ft), so the border is 120 − 80 = 40 sq ft. Remember the border subtracts twice from each dimension — once at each end.
Why do flooring quotes add a waste percentage?
Because cuts, offcuts and mistakes consume material the room's area does not. The waste option (typically 5–10%) inflates the order quantity, not the area itself — enter it and the purchase total joins the result.
My room is L-shaped. What do I do?
Split it into two rectangles at the notch, calculate each part, and add the areas. A rectangle formula applied in pieces handles any floor made of straight edges and right angles.







































