🎯 Round to the Nearest Tenth Calculator
Round To Nearest Tenth Calculator
The nearest tenth is one digit after the decimal point. Look at the hundredths digit: 5 or more rounds the tenths digit up, 4 or less leaves it. So 3.46 becomes 3.5 while 3.44 stays 3.4 — the precision used for grades, ratings and measurements.
Enter any decimal and the calculator rounds it to a single decimal place, displaying the result exactly as written, trailing zero included.
How to use this calculator
Enter any decimal to round it to one decimal place.
- Enter the Number.
- Use any number of decimal places in the input.
- Press Calculate.
- Read the rounded tenth exactly as written, trailing zero included.
Worked example: rounding 3.14159, 2.718 and 3.25
3.46: the hundredths digit is 6 → the tenths digit climbs → 3.5.
3.14159: the hundredths digit is 4 → tenths stays → 3.1. (Yes, π loses its tail — that is what rounding to one decimal place means.)
2.718: the hundredths digit is 1 → 2.7.
3.25: the hundredths digit is exactly 5 — a true halfway case, and the one where your rounding mode matters:
Round half up → 3.3 (the school rule: halfway always climbs).
Round half to even → 3.2 (3.2’s tenths digit, 2, is even — banker’s rounding parks the tie there).
What is rounding to the nearest tenth?
Keeping one digit after the decimal point. The hundredths digit decides: 5 or more rounds the tenths digit up, so 3.46 becomes 3.5.
Rounding to the nearest tenth: look at the hundredths digit
One decimal place is the nearest tenth, and the digit that decides is the hundredths digit — the second decimal. Hundredths 0–4: the tenths digit stays as it is. Hundredths 5–9: the tenths digit climbs by one. Everything beyond the tenths place is then dropped, whether it was one digit or ten.
Reference: numbers rounded to the nearest tenth
| Number | Nearest tenth | Number | Nearest tenth |
|---|---|---|---|
| 0.94 | 0.9 | 7.04 | 7.0 |
| 1.26 | 1.3 | 9.97 | 10.0 |
| 2.718 | 2.7 | 12.349 | 12.3 |
| 3.14159 | 3.1 | 25.61 | 25.6 |
| 3.25 | 3.3 | 99.95 | 100.0 |
| 4.68 | 4.7 | 5.55 | 5.6 |
(All rows use round half up; the 3.25 row is the one to re-check under half to even, where it becomes 3.2.)
Why halfway cases cause arguments
A tie like 3.25 is exactly as close to 3.2 as to 3.3, so no rule can be "more correct" — only more consistent. Schools teach half up because it is simple to state. Banks and statisticians prefer half to even because a long run of ties then splits evenly between up and down instead of always inflating the total. Computers add a third wrinkle: many decimals are stored as binary approximations, so a stored "3.25" may be a hair above or below the true tie. The mode selector states which rule this calculator applied, so your answer is never a mystery.
Tenths and significant figures
Rounding to the nearest tenth keeps one decimal place; rounding to a number of significant figures keeps that many meaningful digits wherever they sit. 0.94 to the nearest tenth is 0.9, but to two significant figures it is 0.94 — already exactly two. Measurement work in science mixes both instructions constantly; this page does the place-value one.
Frequently asked questions
What is 3.14159 rounded to the nearest tenth?
3.1. The hundredths digit is 4, so the tenths digit stays at 1 and the rest is dropped.
What is 3.25 rounded to the nearest tenth?
3.3 with round half up (the school rule), but 3.2 with round half to even, because 2 is the even tenths digit. 3.25 is exactly halfway, so the chosen mode decides — pick the one your course or workplace uses in the selector above.
Can rounding to the nearest tenth produce a whole number?
Yes. 9.97 rounds to 10.0, and 99.95 rounds to 100.0 — the climb carries through the 9s. The answer is often written with the trailing .0 (10.0) to show it was rounded to tenths precision.
How far can rounding to the nearest tenth move a number?
At most 0.05 — half of one tenth. 3.14159 moved by about 0.042 (down to 3.1); an exact tie like 3.25 moves by the full 0.05 in whichever direction the mode sends it.
Why does my calculator app sometimes round 3.25 down?
Two possible reasons: it may be using round half to even (3.25 → 3.2), or it stores 3.25 as a binary approximation a fraction below the exact tie, so its "half up" rule fires downward. Both are known behaviours, not faults — this page tells you which rule it applied.







































