💰 Price per Square Meter Calculator
Price Per Square Meter Calculator
Total price lies politely — price the space itself. Compare two properties per square metre and per square foot, for buying or for renting.
Price per square metre: the total price divided by the area — the unit that makes two differently-sized properties honestly comparable. Price per square foot: its US twin; 1 m² = 10.7639 sq ft. Rent per m²: the same unit applied to a monthly rent instead of a price.
Headline prices hide the real comparison: a cheaper apartment can cost more per square meter. Dividing the total price by the area reveals the number that actually matters.
This calculator gives the price per square meter plus the price per square foot, so listings in either system can be judged side by side.
How to use this calculator
Enter the total price and the area in square meters. The calculator returns the price per square meter and per square foot.
- Type the Total price.
- Type the Area in square meters.
- Read the price per square meter instantly.
- Compare with the price per square foot.
Getting the Most From This Price per Square Meter Calculator
The real power of the Price per Square Meter Calculator is comparison: run your current situation, then change one variable and run it again. The difference between the two outputs quantifies your decision in concrete terms.
What does the Price per Square Meter Calculator compute?
It divides a property's total price by its area to give the unit price. You enter the price and the square meters, and it returns the price per square meter and per square foot.
The number that makes two properties comparable
Total price lies politely: a cheaper property can be the worse buy if it is also much smaller. Price per square metre strips out the size difference and prices the space itself — the same unit estate agents use across Europe, Asia and most of the world (with price per square foot as its US twin: 1 m² = 10.7639 sq ft, and this page always shows both).
Worked example: cheaper is not cheaper
- Property A: $450,000 for 120 m² = $3,750.00 per m² (1,291.67 sq ft → $348.39 per sq ft)
- Property B: $430,000 for 105 m² = $4,095.24 per m² (about $380.46 per sq ft)
Property B asks $20,000 less — and charges $345.24 more for every square metre. Neither fact alone decides the purchase (location, condition, layout and legal costs all matter), but per-m² pricing tells you which property’s space is priced richly before emotion and furniture start negotiating with you.
Renters use it too
The same unit disciplines rent hunting: divide the monthly rent by the area and listings become honestly comparable — a $2,400-a-month, 120 m² flat costs $20.00 per m²; a “cheaper” $2,200 flat of 100 m² costs $22.00 per m² and is, metre for metre, the pricier home. Size claims vary between listings, so measure or verify the area where you can — a generous “area” flatters every rate built on it.
Frequently asked questions
How do I calculate price per square metre?
Divide the total price by the area in square metres: $450,000 ÷ 120 m² = $3,750.00 per m². This calculator also converts to price per square foot automatically ($348.39 per sq ft for the same property).
How do I convert square metres to square feet?
Multiply by 10.7639. So 120 m² = 1,291.67 sq ft. To go the other way, divide square feet by 10.7639. This page accepts either unit and converts for you.
Is a lower price per square metre always a better buy?
No — it prices the space, not the situation. A city-centre flat will almost always cost more per metre than a suburban house and may still be the right buy. Use the rate to compare like with like in the same area, and treat a big gap between neighbours as a question to investigate, not an automatic bargain.
What is a good price per square metre?
There is no universal figure — it runs from a few hundred dollars in small towns to well over $10,000 in prime districts of expensive cities. The meaningful comparison is local: the same street, similar condition, similar size. That is what the two-property mode above is for.
Should I use the property’s total area or living area?
Use the same definition for everything you compare. Listings may quote built-up area (including walls, balconies, garage) or net living area, and the two can differ by 15% or more. If a rate looks surprisingly good, check which area it is built on first.







































