🆕 Newly Added Calculators:

🎨 Hex Calculator

Muhammad Yasir Yasin
By Muhammad Yasir Yasin · Updated 11 Nov 2026 Founder · 20 Year+ Telecom + IT Expert
Muhammad Yasir Yasin

Muhammad Yasir Yasin

Founder, metacalculator.org

Muhammad Yasir Yasin is a Telecom + IT expert from Pakistan with 20+ years of proven experience — the career documented on his LinkedIn. He has been in pure IT since 1998, and works as a crypto consultant & trader since 2016. He is the founder of metacalculator.org, seotools.metacalculator.org (SEO Tools) and metatrendonline.com (Digital Products Market Place): free tools built to give clear, checked answers, with no sign-ups and no paywalls.

Every calculator here is built from the published formula, tested by hand, and explained in plain words.

Hex Calculator

Result

Bitwise Operations

Result

Bitwise operations run on the binary underneath: each hex digit is four bits, and the two numbers are padded with leading zeros to the same length so the digits align. NOT flips every bit of the first number, padded up to a whole number of bytes (2, 4, 6… hex digits).

Hex Converter

Result

One value, three forms: the converter shows the hex, decimal and binary versions of a single number, with no arithmetic.

Hexadecimal packs binary into a compact base-16 form: digits 0–9 plus letters A–F, where each position is worth sixteen times the one to its right. Programmers meet it in color codes, memory addresses and Unicode points.

Type two hex numbers, pick the operation, and you get the answer in both hexadecimal and decimal — no manual base conversion needed.

How to use this calculator

Type two hexadecimal numbers using digits 0-9 and letters A-F, pick an operation, and press Calculate.

  1. Type the first hexadecimal number, using digits 0-9 and letters A-F in either case.
  2. Choose the Operation: add, subtract or multiply.
  3. Type the second hexadecimal number.
  4. Press Calculate and read the answer in hexadecimal, with the decimal equivalent shown underneath.

Sixteen digits: 0–9, then A–F

Hexadecimal counts in sixteens. When it runs out of ordinary digits it keeps going with letters: after 9 comes A (ten), B (eleven), C (twelve), D (thirteen), E (fourteen) and F (fifteen) — then, at sixteen, a carry produces 10. Those letters are digits, not variables; treating them as plain numbers is the whole trick of hex. Programmers live in hex because one hex digit is exactly four binary bits, so long binary strings compress into something readable — memory addresses, colour codes and error dumps all speak it.

What a hex number is worth

Hex19AF101FC2FF
Decimal1910151631194255

Each position left multiplies by 16: in C2, the C (twelve) sits in the sixteens place — 12 × 16 = 192 — plus 2, giving 194.

Worked example: A + 5

Step 1 — read the letter as a number: A is ten — the letters are digits, and A is simply 10 wearing a hex costume

Step 2 — add, in decimal underneath: 10 + 5 = 15

Step 3 — write the answer as a hex digit: fifteen has its own single digit in hex — F — so no carry is needed

Result: F — the whole calculation fits in one column precisely because hex counts all the way to fifteen before it must carry. Check in decimal: A = 10 and F = 15, and 10 + 5 = 15 ✓

What does this hex calculator compute?

It adds, subtracts and multiplies hexadecimal (base-16) numbers, the system programmers use for memory addresses and color codes. Answers appear in hex and in decimal.

The other operations

Subtract: C2 − 1F = A3 (check: 194 − 31 = 163). Borrowing in hex brings 16 into the column, not 10.

Multiply: A × 3 = 1E (check: 10 × 3 = 30, and 1E = 16 + 14 = 30). Bigger multiplications are partial products in hex, exactly as in decimal.

Divide: 100 ÷ 10 in hex = 10 — in decimal that is 256 ÷ 16 = 16, and 16 written in hex is 10. Hex divisions look like trick questions until the decimal check confirms them.

Bitwise operations through hex glasses

Bitwise AND, OR and XOR work on the binary underneath, but hex is how they are usually written. Each hex digit is operated on independently — A3 AND 1F: A (1010) AND 1 (0001) = 0000, and 3 (0011) AND F (1111) = 0011, giving 03. Working digit by digit is why hex bitwise questions appear in every computing course.

Converting a single value

Decimal 255 = hex FF = binary 11111111 — a value every programmer recognises, because 255 is the largest that fits in one byte (8 bits). The converter on this page moves any single value among the three forms; divide-by-16 remainders do it by hand for hex, and grouping binary digits in fours does it between binary and hex with no arithmetic at all.

Frequently asked questions

What is A + 5 in hex?

F. A is ten, ten plus five is fifteen, and fifteen is the single hex digit F — no carry, because hex has a digit for it. The calculator adds your own hex numbers column by column and shows the working.

What do the letters A to F mean in a hex number?

They are digits with values ten to fifteen: A = 10, B = 11, C = 12, D = 13, E = 14, F = 15. Base 16 needs sixteen digit symbols, and the letters simply continue where 0–9 run out — they are not variables or units.

Can this calculator divide hex numbers?

Yes — division joins addition, subtraction and multiplication. A neat example: 100 ÷ 10 in hex equals 10, because in decimal that is 256 ÷ 16 = 16, and 16 written in hex is 10. Every result is also shown in decimal so you can verify it.

How do I convert 255 to hex?

255 is FF. Divide by 16: 255 = 15 × 16 + 15, and fifteen is the digit F in both the sixteens place and the units place. The converter above does single values in both directions — 255 is also 11111111 in binary, the largest 8-bit value.

Why is hex used so much in computing?

Because it is binary in shorthand. One hex digit is exactly four binary bits, so a byte (8 bits) is always exactly two hex digits, and long binary strings shrink to a quarter of their length without any conversion errors creeping in. Addresses, colour codes (#RRGGBB) and machine code all lean on that exact fit.