🆕 Newly Added Calculators:

📏 Height Calculator

Muhammad Yasir Yasin
By Muhammad Yasir Yasin · Updated 12 Nov 2026 Founder · 20 Year+ Telecom + IT Expert
Muhammad Yasir Yasin

Muhammad Yasir Yasin

Founder, metacalculator.org

Muhammad Yasir Yasin is a Telecom + IT expert from Pakistan with 20+ years of proven experience — the career documented on his LinkedIn. He has been in pure IT since 1998, and works as a crypto consultant & trader since 2016. He is the founder of metacalculator.org, seotools.metacalculator.org (SEO Tools) and metatrendonline.com (Digital Products Market Place): free tools built to give clear, checked answers, with no sign-ups and no paywalls.

Every calculator here is built from the published formula, tested by hand, and explained in plain words.

Height Calculator

Result

Height lives in two measurement worlds — feet and inches in some countries, centimeters in most others. Enter your height in either system and this calculator shows the exact equivalent in the other, down to a tenth of a unit.

The conversion uses the exact definition of the inch (2.54 cm), so results match official conversion tables with no rounding drift.

What this calculator does

Height is one of the most frequently converted measurements in everyday life, and also one of the most awkward, because the world genuinely runs on two different systems at once. Most countries record height in centimetres. The United States, and informal conversation in the United Kingdom and several other countries, still records it in feet and inches. Medical forms, school records, sports profiles, clothing size charts, driver's licences, dating profiles, children's growth charts and international application forms all ask for height — and they do not all ask for it in the same unit. Every time the unit on the form differs from the unit you know your height in, a conversion has to happen, and it has to happen correctly, because a height entered in the wrong unit is not a small error. It is a completely different person.

This calculator performs that conversion in both directions, from one short form. In its default mode it converts a height given in feet and inches into centimetres, and it also shows the same height in metres and written back out in feet and inches so you can check the round trip at a glance. In its second mode it accepts a height you already know in centimetres and gives you the metres figure and the feet-and-inches figure that most imperial-unit forms actually want. That is the whole job of the page, and it does it with the exact definition of the inch, not with an approximation — a point worth understanding, because it is why the answers this calculator gives can be used on official forms without a second thought.

The exact definition behind every result

Since 1959 the inch has been defined internationally as exactly 2.54 centimetres. Not approximately 2.54, not 2.54 to two decimal places — exactly 2.54, by definition. The foot, being twelve inches, is therefore exactly 30.48 centimetres. Every conversion on this page is built from that single definitional fact, which means there is no accumulated rounding error hiding inside the method itself. When this calculator converts 5 feet 10 inches, it first combines the feet and inches into a single count of inches — 5 feet is 60 inches, plus the 10 inches gives 70 inches in total — and then multiplies that total by 2.54. Seventy times 2.54 is 177.8, so the height is 177.8 centimetres. The arithmetic is simple enough to check on paper, and the worked examples in this guide are all set out step by step so that you can do exactly that.

The reverse direction uses the same definition in reverse. A height in centimetres is divided by 2.54 to get total inches, and that total is then split into whole feet and the inches that remain. This splitting step is where most hand conversions go wrong, because people divide by twelve, round the answer, and report something like "5.9 feet" — a decimal-feet figure that no form asking for feet and inches actually wants, and which is easily misread as 5 feet 9 inches when it means something quite different. The calculator never produces decimal feet. It always separates the whole feet from the remaining inches, which is the format imperial-unit forms, size charts and records expect.

The two modes, and which one you need

The Feet + inches mode is the default, and it is the mode to use when you know your height the way most people in imperial-unit countries know it: as a pair of numbers, such as 5 feet 7 inches or 6 feet 1 inch. Enter the feet in the first field and the extra inches in the second, and the calculator treats them as one measurement. A common hesitation is whether the inches field may hold a value of twelve or more — in normal use it should not, because twelve inches is another foot, and a height written as 5 feet 14 inches is really 6 feet 2 inches. Enter heights the way they are conventionally spoken, with the inches part below twelve, and the result will match the spoken height exactly when it is converted back.

The Centimeters mode is for the opposite journey. If your height is recorded in centimetres — on a medical record from most of the world, a European identity document, or a growth chart — select centimetres, enter the single number, and the calculator produces the feet-and-inches equivalent that an American or informal British form requires. Note that the centimetres field is always visible on the page, whichever mode is selected; it is only used in centimetres mode. If you are in feet-and-inches mode, the number sitting in the centimetres field has no effect on your result at all — a design detail worth knowing, because it is the source of the most common confusion reported with dual-mode converters: editing a field that the current mode ignores, and wondering why the answer did not change.

Whichever mode you choose, the calculator always shows the height in three forms at once: centimetres to one decimal place, metres to three decimal places, and feet and inches with the inches to one decimal place. Showing all three is deliberate. The metres figure is what scientific and many official contexts want; the centimetres figure is the everyday metric standard; and the feet-and-inches figure lets imperial users verify instantly that the conversion describes the same person they started with.

Worked example — the calculator's own defaults

The calculator opens set to 5 feet 10 inches, so the first result you see is worked here in full. Five feet is 5 × 12 = 60 inches; adding the 10 inches gives 70 inches in total. Multiplying by the exact definition, 70 × 2.54 = 177.8 cm. Dividing by 100 gives the metres figure, 1.778 m. Converting back, 177.8 cm is exactly 70 inches, which splits cleanly into 5 whole feet and 10 remaining inches, displayed as "5 ft 10 in". The round trip closes perfectly, as it should: the default height is the same person in all three rows.

A taller example: 6 feet 1 inch is 73 inches in total, and 73 × 2.54 = 185.4 cm, which is 1.854 m. Notice how a difference of three inches over the default height becomes a difference of 7.6 cm — three times 2.54 — because every inch carries its full 2.54 centimetres with it. Small height differences are not small in centimetres, which is why guessing a conversion ("about 180, probably") so often produces a figure that is visibly wrong to anyone who knows the person.

From the metric side: enter 180 cm in centimetres mode and the calculator returns 180 cm, 1.8 m, and "5 ft 10.9 in". That last figure surprises many people, who casually describe 180 cm as "five foot ten" — it is actually a little taller, nearly five foot eleven, and the calculator's one-decimal inches figure shows precisely how much taller. Enter 165 cm and the result is 165 cm, 1.65 m, and "5 ft 5 in": exactly 5 feet and 4.96 inches before rounding, with the remainder rounding to 5.0 inches on display. Enter 152.4 cm and you get a satisfyingly round imperial answer — "5 ft 0 in", at 1.524 m — because 152.4 cm is, by the 30.48 cm definition of the foot, exactly five feet.

Conversion table

The table below is built only from the verified examples above and from direct multiples of the definitions themselves (1 in = 2.54 cm, 1 ft = 30.48 cm), so every row can be checked against the definition alone:

HeightCentimetresMetres
1 in2.54 cm—
1 ft (12 in)30.48 cm0.305 m (30.48 ÷ 100)
5 ft 0 in (152.4 cm entered)152.4 cm1.524 m
5 ft 5 in165 cm1.65 m
5 ft 10 in177.8 cm1.778 m
180 cm entered180 cm1.8 m (= 5 ft 10.9 in)
6 ft 1 in185.4 cm1.854 m

Read the table as a scale rather than a lookup for every possible height — for any height not listed, the calculator itself is the table. What the table demonstrates is the spacing of the system: each additional inch adds exactly 2.54 cm, each additional foot exactly 30.48 cm, with no exceptions anywhere in the range.

How to measure your height properly

A converter can only convert the number you give it, so the quality of the result starts with the quality of the measurement. Height measured carelessly can easily be out by a centimetre or more — enough to change the last digit the calculator reports, and enough to matter on records that are compared over time, such as children's growth tracking. The standard technique is simple. Stand on a hard, flat floor — not carpet, which compresses unevenly under the heels — with your back against a wall or door frame. Take your shoes off; even a thin sole adds height you do not have, and trainers add a great deal. Bring your heels together, stand tall with your weight even on both feet, and look straight ahead at a point at eye level rather than up or down, because tilting the head moves the top of the skull.

Have someone place a flat, rigid object — a hardback book is the classic choice — horizontally on the top of your head, pressing hair down, and mark the wall lightly at the underside of the book. Then step away and measure from the floor to the mark with a tape. Measure twice and use the consistent figure; if the two attempts disagree by more than a few millimetres, measure a third time. Two further subtleties are worth knowing. First, people are measurably taller in the morning than in the evening, because the spinal discs compress slightly under the day's load — so if you track height over months, measure at roughly the same time of day. Second, hair is not height: voluminous hairstyles should be flattened by the book, never measured over. If you are converting a height someone else measured for you — a clinic, a school, a sports club — you can trust their figure and convert it directly; if you measured yourself alone by stretching a tape overhead, re-measure with help before treating the converted figure as exact.

Why centimetres mode exists at all

It is reasonable to ask why a converter needs a dedicated mode for a number that is already metric. The answer is that the difficult direction in practice is not feet-to-centimetres; it is centimetres-to-feet-and-inches, because that direction contains the awkward split into whole feet and remaining inches described earlier. A single centimetres figure such as 165 or 180 does not announce its imperial equivalent in any intuitive way — there is no mental shortcut that reliably lands on "5 ft 5 in" or "5 ft 10.9 in" — and the remainder inches are exactly where published conversion charts, which typically step in whole inches, leave gaps. Centimetres mode exists to do that splitting step precisely, to one decimal place of an inch, for any centimetre value at all, including values between chart rows. If you live in a metric country and face an imperial form — a visa application, a US employer's onboarding documents, an American clothing or harness size chart — this is the mode built for you.

Understanding rounding in the results

The calculator rounds each output row once, at the end: centimetres to one decimal place, metres to three, and the leftover inches to one. One-decimal centimetres is finer than any tape measure can honestly read, so no real information is lost. The metres figure carries three decimals for the same reason — 1.778 m preserves the full centimetre precision, where a two-decimal 1.78 m would silently discard most of a centimetre. The important discipline is never to round twice: do not take the calculator's already-rounded centimetres figure, convert it by hand into inches, round again, and expect the last digit to survive. Chained rounding is how a correct 5 ft 10.9 in becomes a quoted "about 5 ft 11 in" and then, converted back by someone else, a different centimetre figure from the one you started with. Keep the original measurement as your source of truth, convert once, and quote the calculator's figure as given.

Common mistakes

  • Entering centimetres in feet-and-inches mode. Typing "180" as feet produces an astronomical conversion. Check the mode selector before the numbers — it decides what the fields mean.
  • Editing the centimetres field while in feet-and-inches mode. The field is always on the page but is ignored in that mode. Switch the mode first, then enter the value.
  • Writing decimal feet instead of feet and inches. "5.9 ft" is not 5 ft 9 in. Use the calculator's split format on forms.
  • Rounding inches twice. Convert once from the original measurement and quote the result as displayed.
  • Measuring in shoes, or on carpet, or alone overhead. Each can add or remove a centimetre or more before the conversion even begins — see the measuring section above.
  • Treating 180 cm as exactly 5 ft 10 in. It is 5 ft 10.9 in. The near-round imperial descriptions of round metric numbers are usually approximations.

Key terms

  • Inch — the imperial unit of length defined internationally as exactly 2.54 cm.
  • Foot — twelve inches; exactly 30.48 cm by the same definition.
  • Centimetre — one hundredth of a metre; the standard unit for height in most of the world.
  • Remainder inches — the inches left over after whole feet are taken out of a total inch count; the figure shown after "ft" in the feet-and-inches result.

Related calculators

Frequently asked questions

How do I convert 5 feet 10 inches to centimetres?

Add the feet and inches into a single inch count first: 5 feet is 60 inches, plus 10 gives 70 inches. Then multiply by 2.54, the exact number of centimetres in an inch: 70 × 2.54 = 177.8 cm. That is the calculator's default example — 5 ft 10 in is 177.8 cm, or 1.778 m.

Why does the calculator use 2.54 to convert inches to centimetres?

Because 2.54 is not an approximation — since 1959 the inch has been defined internationally as exactly 2.54 centimetres, and the foot as exactly 30.48 centimetres. Conversions built on that definition are exact, so the figures this calculator gives can be used on official forms.

How tall is 180 cm in feet and inches?

180 cm is 5 ft 10.9 in (and 1.8 m). It is often described loosely as five foot ten, but the exact conversion is a little taller — nearly five foot eleven — which is why the calculator shows the inches to one decimal place.

How tall is 165 cm in feet and inches?

165 cm is 5 ft 5 in (and 1.65 m). Before rounding, the remainder after the whole feet is 4.96 inches, which the calculator rounds to 5.0 inches for display, giving the clean 5 ft 5 in result.

Why is there a centimetres box on the page when I am converting from feet and inches?

The centimetres field is always present but is only used when you select Centimeters in the Convert from control. In Feet + inches mode it has no effect on the result. Switch the mode first, then enter your centimetre value.

What is 152.4 cm in feet and inches?

Exactly 5 ft 0 in (1.524 m). Because one foot is defined as exactly 30.48 cm, five feet is 152.4 cm precisely — one of the few heights that is a round number in both systems.

How accurate is this height conversion?

The conversion itself is exact, because it is built on the definition of the inch. The limiting factor is your measurement: a height measured in shoes, on carpet or with a stretched tape can be out by a centimetre or more before any conversion happens. Measure barefoot on a hard floor, twice, at the same time of day for comparable results.